Dual Wall-Mounted Holder for Phones, Remotes and Accessories

The wall-mounted toilet-paper and tissue holder is a compact plastic basket that attaches to a smooth surface using an adhesive mounting pad. It holds a compatible toilet roll or tissue pack while allowing the paper end to pass through the side opening for easier access.

The holder raises tissues away from the floor or crowded surfaces and uses available wall space without drilling. Its open design makes the contents visible and allows a roll or tissue pack to be replaced easily.

• Practical wall-mounted holder for a compatible toilet roll or tissue pack.
• Adhesive installation without drilling.
• Side opening for feeding and pulling the paper.
• Open slatted design promotes ventilation and prevents water from collecting inside.
• Visible contents make it easier to know when replacement is required.
• Rounded edges and compact dimensions.
• Can also organise selected lightweight items that fit inside it.
• Suitable for bathrooms, toilets, and selected laundry or organising areas.
• Several colours appear in the images, but no colour-selection option is provided; colour is subject to availability.

• Holding a toilet roll with the paper fed through the side opening.
• Holding suitably sized packs of dry or wet tissues.
• Organising selected small, lightweight bathroom essentials.
• Using wall space beside a toilet or basin.
• Installing multiple holders separately to organise different categories.

1. Select a smooth, level surface such as smooth tile or glass.
2. Remove dust, grease, and soap residue from the mounting area.
3. Dry the surface completely because moisture reduces adhesion.
4. Choose the position and check that the paper will be easy to pull before attaching the pad.
5. Remove the protective film without touching the adhesive surface.
6. Press the mounting pad firmly and evenly against the wall.
7. Leave it unloaded for the period stated in any supplied adhesive instructions.
8. Attach the holder, add the roll or tissues, and test stability gradually.

1. Place the toilet roll vertically inside the holder.
2. Pull out the beginning of the paper.
3. Feed the end through the side opening.
4. Pull the paper gradually during use and tear it along the roll’s perforation.

Without a holder: A toilet roll or tissue pack may sit on a wet or crowded surface and may fall easily.

With the wall-mounted holder: Tissues remain in a designated, accessible position while wall space is used without drilling.

The holder is plastic, and matching products identify the material as polypropylene, or PP. Clean it manually using a damp cloth or soft sponge with mild washing liquid, then dry it. Avoid very hot water, strong cleaners, and abrasive tools. Do not pull the holder forcefully, as this may affect the adhesive mounting pad.

• Toilet rolls that fit the holder dimensions.
• Suitably sized packs of dry or wet tissues.
• Clean, smooth tile, glass, and sealed surfaces.
• Small bathrooms and spaces where drilling is undesirable.
• Lightweight bathroom or laundry accessories.

• Rough, porous, or heavily jointed surfaces.
• Wallpaper, peeling surfaces, or weak paint.
• Damp surfaces or areas covered with grease and soap residue.
• Rolls or tissue packs larger than the holder.
• Heavy or glass containers because no maximum load is specified.

• This is a paper and tissue holder, not a dedicated phone or remote-control holder.
• Images showing several holders demonstrate organising options and do not mean that two holders are included.
• Check the toilet-roll or tissue-pack dimensions before use.
• Adhesive strength depends on surface smoothness, cleanliness, dryness, and installation quality.
• The open design does not fully cover the paper or protect it from direct water splashes.
• Do not mount it over a toilet or breakable items until its stability has been confirmed.
• Do not use it for heavy or glass containers.

What is this wall-mounted holder used for?

It holds a compatible toilet roll or tissue pack and allows the paper end to pass through its side opening.

Is it a phone and remote-control holder?

No. The product images show that its primary function is holding toilet paper, tissues, and selected lightweight items.

Does it require drilling?

No. It attaches to a clean, dry, and smooth surface using an adhesive mounting pad.

What are the holder dimensions?

The product page lists dimensions of 13.5 × 11 × 13 cm.

Does it fit every toilet roll?

This cannot be guaranteed because toilet-roll dimensions vary. Compare the roll diameter and width with the holder dimensions before use.

Does it protect the paper from water?

The holder has an open design and is not a waterproof cover, so install it away from direct water splashes.

Can two holders be installed together?

Yes. Several holders may be installed separately if space permits, but each holder requires its own mounting pad.

Can I select the colour?

Several colours appear in the images, but the page currently provides no colour-selection option, so the supplied colour is subject to availability.

• Adhesive Paper-Roll Holder for organising paper rolls in kitchens or other suitable spaces.
• Bag and Towel Holder for organising everyday household supplies.
• Adhesive Metal Storage Rack for adding storage to compatible surfaces.
• Bag-Sealing Clip for closing and organising small bags.