Self-Adhesive Kitchen Foil Roll






From the same category
Product Demonstration Video
See how to measure and cut the self-adhesive kitchen foil, remove its backing and apply it gradually to a clean surface for covering suitable kitchen shelves, cabinets and walls.
The self-adhesive kitchen foil roll is a 60 cm-wide peel-and-stick covering for suitable smooth surfaces such as shelves, cabinets and selected kitchen walls. It helps reduce direct contact between the original surface and everyday grease, moisture and dirt while providing a wipeable outer layer.
The roll has a silver finish and is available in either a 3-metre or 5-metre length. It can be measured and cut to fit the required area, making it suitable for both smaller covering jobs and larger surfaces.
The Problem and Solution
The problem: Kitchen shelves, cabinets and walls near food-preparation areas can be exposed to grease, moisture and stains, requiring repeated cleaning of the original surface.
The solution: The roll provides a cut-to-fit adhesive layer over a compatible surface, allowing the outer covering to receive everyday splashes and dirt instead of the original finish.
Features
- Self-adhesive design that requires no separate glue.
- Fixed width of 60 cm.
- Available in 3 m or 5 m lengths.
- Silver finish for a neat metallic appearance.
- Water- and moisture-resistant according to the product information.
- Designed for normal kitchen heat conditions, not direct flame or extreme heat.
- Helps protect suitable surfaces from everyday grease and dirt.
- Can be measured and cut to match the installation area.
- Wipeable surface for easier routine cleaning.
Uses
- Covering suitable smooth shelves.
- Lining compatible kitchen drawers and cabinets.
- Covering selected smooth kitchen walls away from direct flame.
- Refreshing the appearance of suitable smooth furniture and surfaces.
- Creating a wipeable layer in areas exposed to everyday moisture and stains.
How to Install
- Measure the surface width and length before cutting the roll.
- Remove dust, grease and cleaning residue, then allow the surface to dry completely.
- Test adhesion on a small hidden area, especially on painted or delicate finishes.
- Cut the required piece while leaving a small margin for final trimming.
- Peel back a short section of the backing and align the first edge carefully.
- Remove the backing gradually while smoothing the foil from the centre toward the edges with a soft tool.
- Avoid stretching the roll, which may cause misalignment or wrinkles.
- After checking the alignment, trim the excess carefully without damaging the original surface.
Size and Coverage Guide
- 60 × 300 cm option: provides a theoretical coverage of up to 1.8 m² before trimming, overlaps and waste.
- 60 × 500 cm option: provides a theoretical coverage of up to 3 m² before trimming, overlaps and waste.
- Measure the surface and allow extra material for edges and installation adjustments.
Why Choose This Product?
It combines self-adhesive installation, cut-to-fit flexibility and resistance to water and moisture with two practical length options. It provides a straightforward way to cover compatible kitchen surfaces without preparing separate glue.
Without It vs. With It
Without the roll: Grease, moisture and stains reach the shelf or cabinet surface directly, requiring repeated cleaning of the original finish.
With the roll: The compatible surface gains a wipeable silver layer that helps reduce direct contact with everyday splashes and dirt.
Care and Cleaning
- Wipe with a soft, slightly damp cloth and dry afterward.
- Use a mild cleaner when required and avoid abrasive products or strong solvents.
- Do not cut directly on the covered surface with a sharp knife.
- Inspect the edges periodically and only press them back down when the area is clean and dry.
- Keep the covering away from open flame and direct heating elements.
Suitable For
- Smooth, clean and dry shelves, cabinets and drawers.
- Compatible kitchen walls away from direct heat and flame.
- Users wanting a wipeable silver covering for suitable surfaces.
- Areas that can be measured and covered using cut sections of the roll.
May Not Be Suitable For
- Rough, peeling, damp, dusty or greasy surfaces.
- Installation directly beside flame, cooktops or heating elements.
- Covering vents, electrical outlets or gas and electrical connections.
- Use as a fireproof or certified thermal barrier.
- Direct food contact unless the supplied label confirms suitability.
Product Specifications
| Property | Details |
|---|---|
| Product Type | Self-adhesive surface-covering foil roll |
| Primary Use | Covering and protecting suitable shelves, cabinets and kitchen walls |
| Colour | Silver |
| Width | 60 cm |
| Length Options | 3 m or 5 m, according to the selected option |
| Theoretical Coverage | 1.8 m² for 3 m or 3 m² for 5 m, before trimming and waste |
| Installation | Self-adhesive backing; no separate glue required |
| Water and Moisture Resistance | Resistant according to the product information; not intended for immersion |
| Heat Resistance | Designed for normal kitchen conditions; maximum temperature is not specified |
| Exact Material | Not specified in the product information |
| Package Contents | One roll in the selected length |
Important Warnings
- Keep away from open flame, extremely hot surfaces and direct heating elements.
- Do not use it as a fireproof or certified thermal barrier.
- Test adhesion and removal on a hidden area; residue-free removal is not confirmed for every surface.
- Do not cover vents, switches, outlets or gas and electrical connections.
- Use cutting tools carefully and keep them away from children.
- Adhesion performance depends on the surface being smooth, clean and completely dry.
Frequently Asked Questions
What is the self-adhesive kitchen foil used for?
It provides a cut-to-fit adhesive layer that helps cover compatible surfaces and reduce direct exposure to everyday moisture, grease and stains.
Which sizes are available?
The roll is 60 cm wide and is available in either a 3 m or 5 m length.
Does it require separate glue?
No. It has a self-adhesive backing, but the surface must be smooth, clean and completely dry.
Can it be applied to every surface?
No. It is best suited to smooth, clean and dry surfaces. Rough, peeling, damp or greasy areas may not provide reliable adhesion.
Is it waterproof?
The product information describes it as resistant to water and moisture, but it is not designed for immersion or locations where water continuously collects.
Can it be installed behind a cooker?
Only use it away from open flame and extremely hot surfaces while following the cooker’s clearance instructions. It is not a fireproof barrier.
How is it cleaned?
Wipe it with a soft, slightly damp cloth and dry it. Avoid abrasive tools, strong solvents and harsh cleaners.
Can it be removed without leaving residue?
This is not confirmed for every surface. Test installation and removal on a small hidden area before covering the full surface.
You May Also Need