Crystal Ice Cube Mold

The crystal ice mold is a reusable freezer mold designed to create four large geometric ice pieces inspired by the appearance of cut crystal, adding a distinctive presentation to juice, iced coffee, soft drinks and other cold beverages.

The mold consists of two opposing sections that close together to form the ice shapes. It measures approximately 13 × 13 cm when open. Its four clearly arranged cavities produce four large pieces per batch for organized preparation and serving.

The problem: Conventional ice cubes may give drinks an ordinary appearance, while creating consistently shaped decorative ice for hospitality and gatherings can be difficult.

The solution: This mold produces four large crystal-inspired geometric ice pieces, helping cold drinks look more organized and visually distinctive.

• Geometric design inspired by cut crystal.
• Creates four large ice pieces per batch.
• Two opposing sections complete the ice shapes.
• Enhances the presentation of cold beverages.
• Suitable for juice, iced coffee and soft drinks.
• Reusable for multiple batches.
• Easy to use and clean according to the product description.
• Suitable for home use and hospitality.
• Useful for parties when several batches are prepared in advance.
• Compact 13 × 13 cm size when open.

• Preparing ice for juice and cold beverages.
• Serving iced coffee with a decorative touch.
• Adding geometric ice to soft drinks.
• Preparing drinks for hospitality, parties and gatherings.
• Making batches in advance for storage in a suitable freezer container.

1. Wash the mold manually and dry it before first use.
2. Open it and check that all cavities are clean.
3. Close the two sections correctly so that the cavities align.
4. Add potable water through the filling openings, leaving a little room for expansion.
5. Place the mold horizontally on a level freezer surface.
6. Allow the water to freeze completely; timing varies with freezer temperature and water quantity.
7. If difficult to open, leave the mold briefly at room temperature after removing it from the freezer.
8. Open both sections and release the ice gently without using a knife or sharp tool.

For better results: Keep the mold level and avoid overfilling. Ice clarity depends on the water, freezing method and freezer temperature. “Crystal” describes the geometric shape and does not guarantee completely clear ice.

Measurement note: Dimensions are approximate and may vary slightly due to manual measurement. Individual ice-piece dimensions are not specified, so check glass compatibility after the first use.

It provides a reusable way to create four large pieces of ice in a design that differs from ordinary cubes. It suits home beverages and hospitality and adds visual interest without requiring an electrical appliance.

With a conventional tray: Drinks generally contain ordinary ice pieces with little decorative detail.

With the crystal mold: Each batch produces four large geometric pieces that make beverage presentation more distinctive.

Clean the mold after each use to remove water or beverage residue, then dry it thoroughly before closing or storing it. Never use knives or sharp tools to release the ice, as these may damage the cavities or mold surface.

Care notice: The exact material and dishwasher compatibility are not stated, so gentle hand washing is recommended. The mold is intended for freezing and cold beverages. No confirmed temperature rating allows its use in an oven, microwave or with hot liquids.

• Juice and soft drinks.
• Iced coffee and other chilled beverages.
• Presenting home beverages attractively.
• Parties and gatherings when batches are prepared in advance.
• Anyone seeking a reusable ice mold.
• Glasses with openings wide enough for large ice pieces.

• You need many ice pieces from a single batch; the mold creates four.
• Your glass opening is too narrow for large ice pieces.
• You require guaranteed completely transparent ice.
• You require a specific material or confirmed BPA-free certification.
• You intend to use the mold in an oven, microwave or with hot liquids.

• Use potable water when preparing ice.
• Do not fill the cavities completely; leave room for water expansion.
• Place the mold horizontally on a level freezer surface.
• Do not use knives or sharp tools to release the ice.
• Check the glass opening before dropping a large ice piece inside.
• Do not use in an oven, microwave or with hot liquids without confirmed instructions.
• Keep away from direct heat sources.

What is a crystal ice mold?

It is a reusable mold that creates four large geometric ice pieces inspired by the appearance of cut crystal.

How many ice pieces does it make?

It creates four ice pieces per batch.

What is the mold size?

It measures approximately 13 × 13 cm when both sections are open.

Does it produce completely clear ice?

Complete clarity is not guaranteed. Ice clarity depends on the water, freezing method and freezer temperature. “Crystal” describes the shape.

Is it suitable for iced coffee and juice?

Yes. It is suitable for iced coffee, juice, soft drinks and other cold beverages.

How long does freezing take?

No fixed time is stated. Freezing time varies according to freezer temperature, water quantity and ice-piece size.

Is the material food-safe and BPA-free?

The exact material and BPA-free certification are not stated in the confirmed specifications, so these claims cannot be verified without packaging information.

Is it dishwasher-safe?

Dishwasher compatibility is not confirmed. Gentle hand washing followed by thorough drying is recommended.

Can it be used for baking or hot liquids?

No confirmed heat rating is provided, so use should be limited to freezing and cold beverages.

• Rose-Shaped Glass Coffee Mug
• Football-Shaped Glass for Cold Drinks
• Green Leaf Serving Spoon for Kitchen and Table Use