Portable LED Battery Powered Light

Add convenient auxiliary lighting where a power outlet is unavailable with this portable press-activated LED light. Its compact square design resembles a wall switch and operates using three AAA batteries, while the magnetic base and rear hanging slot provide flexible placement options.

Important: The light requires three AAA batteries, which are not included. It is switched on and off manually by pressing the front; this model does not contain a motion sensor.

Closets, storage spaces and small corners may not receive sufficient light, while a nearby electrical outlet or suitable wiring may not be available for a conventional lamp.

This battery-powered LED lamp provides auxiliary light without wiring. It switches on or off with a direct press, and its compact size and magnetic base make it easy to move between different locations as required.

• Energy-efficient LED auxiliary lighting.
• Manual press switch for turning the light on and off.
• Powered by three AAA batteries.
• Requires no electrical outlet or wiring.
• Magnetic base for compatible ferrous-metal surfaces.
• Rear hanging slot for use with a suitable wall fastener.
• Compact, lightweight square design for portability and storage.
• Single LED light bar positioned in the center of the switch.
• Suitable for home, backup and travel lighting.
• Practical white color for different interior spaces.

• Lighting closets, large drawers and storage areas.
• Providing auxiliary light in hallways and dark corners.
• Using beside a bed or inside a dressing room.
• Providing temporary backup light during a power outage.
• Using during travel or camping in a dry, sheltered location.
• Lighting a toolbox or small work area.
• Using inside a parked vehicle away from driving controls.
• Carrying as a compact light source when required.

1. Confirm that the light is switched off before opening the battery compartment.
2. Open the rear cover gently without forcing it.
3. Install three new, matching AAA batteries.
4. Match the positive and negative ends to the markings inside the compartment.
5. Close the battery cover securely.
6. Press the front switch to test the light.
7. If it does not operate, switch it off and recheck battery orientation and contact.

Position the magnetic base on a clean, level and compatible ferrous-metal surface. Test the holding strength before releasing the light, as magnets do not attach to every type of metal.

The rear slot may be used with a suitable wall fastener. Confirm that the fastener head fits correctly and remains capable of supporting the lamp.

The light may be placed on a level surface or carried to the required location, provided it remains away from water, heat and fall hazards.

1. Confirm that the batteries are installed correctly.
2. Press the front section to switch the LED on.
3. Press it again to turn the light off.
4. Switch it off after use to help extend battery life.
5. This model operates manually and does not activate automatically through motion or darkness.

Dimensions according to the supplied image: 8.6 cm long × 8.6 cm wide × 2.5 cm thick.

Leave sufficient front clearance for pressing the switch and use a level mounting surface that does not expose the light to falling. Magnetic strength, fastener type and surface material all affect stability.

• Provides auxiliary light without wiring or electrical work.
• Simple direct press operation.
• Easy to move between different locations.
• Compact size suits closets and small corners.
• Offers several placement and hanging options.
• Useful as part of travel and emergency supplies.

A closet or small corner remains dark, requiring a phone light or an electrical extension cable for visibility.

You gain battery-powered auxiliary LED lighting that activates with one press and can be moved to the required location without wiring.

• Switch the light off before cleaning or replacing batteries.
• Wipe it using a soft, dry cloth.
• Do not immerse it in water or spray liquids directly onto it.
• Avoid strong cleaners, alcohol and solvents.
• Remove the batteries before extended storage.
• Inspect the battery compartment for leakage or corrosion.
• Do not open the LED module or modify the internal circuit.
• Discontinue use if the housing breaks or becomes unusually hot.

• Closets, dressing rooms and storage spaces.
• Auxiliary home lighting.
• Travel and camping in dry, sheltered places.
• Backup supplies for power outages.
• Metal surfaces compatible with the magnetic base.
• Users wanting a simple light without electrical wiring.

• Outdoor use in rain or wet environments.
• Bathrooms and areas exposed to steam or direct water.
• Full primary lighting for large rooms.
• Users requiring automatic motion-sensor activation.
• Users requiring a rechargeable lamp.
• Use near flames or high-temperature sources.
• Non-magnetic surfaces when relying only on the magnetic base.

• Batteries are not included; three AAA batteries are required.
• Do not mix old and new batteries or different battery types.
• Observe battery polarity and never recharge non-rechargeable batteries.
• Remove depleted or leaking batteries immediately without touching leaked material directly.
• The light is not stated to be waterproof; use it in a dry location.
• It is not a replacement for certified emergency or primary room lighting.
• Do not stare directly into the LED from close range for an extended period.
• Confirm secure magnetic or wall mounting to prevent falling.
• Keep the batteries and lamp away from young children.
• Dispose of batteries according to local recycling guidance.

It is switched on and off manually by pressing the front switch.

No. This model does not activate automatically and requires manual pressing.

It requires three AAA batteries.

No. Batteries are not included with the light.

Yes. It has a magnetic base, provided the metal is compatible and the magnetic hold is sufficient.

The rear hanging slot may be used with a suitable wall fastener after confirming a secure fit.

It may provide temporary auxiliary light but is not a replacement for certified emergency-lighting systems.

Yes, in a dry and sheltered place away from rain, moisture and high temperatures.

• Battery-Powered Motion Sensor Night Light
• Battery-Powered LED Bulb for Home and Emergency Lighting