Heavy Duty Adhesive Screw for No-Drill Wall Mounting

A no-drill adhesive wall screw is a self-adhesive mounting base with a projecting threaded screw, used to install or hang compatible items on smooth surfaces without drilling holes or using conventional wall anchors.

The K&M Heavy-Duty Adhesive Screw provides a practical way to install compatible household accessories, organizers and lightweight decorations without drilling into the wall. Its transparent adhesive base attaches to clean, smooth surfaces such as tile, glass, metal and polished walls. The waterproof and oil-resistant adhesive is suitable for kitchens and bathrooms.

Two designs are available: model K90 with one projecting screw and model S120 with a wider adhesive base and two screws. Choose according to the mounting holes of the item being installed. Base dimensions and screw spacing are not stated, so compatibility should be confirmed before ordering.

• Adhesive installation without drilling.
• Waterproof and oil-resistant adhesive.
• Advertised support of up to approximately 3 kg when correctly installed on a suitable surface.
• Designed for clean, smooth surfaces.
• Transparent and discreet mounting base.
• Suitable for kitchens, bathrooms, homes and offices.
• Useful for compatible accessories, organizers and lightweight decorations.
• Available with one screw or a wide two-screw base.
• No complicated installation tools required.

• Installing compatible bathroom accessories.
• Hanging lightweight kitchen tools and household items.
• Mounting compatible wall organizers and holders.
• Hanging lightweight decorations with suitable mounting holes.
• Organizing office tools or workspaces.
• Use where drilling into the wall is undesirable.

1. Choose a clean, solid and smooth surface such as tile, glass, metal or a polished wall.
2. Remove dust, grease and moisture from the mounting area and dry it completely.
3. Measure the screw position against the item’s mounting hole before removing the protective backing.
4. Remove the protective film without touching the adhesive.
5. Apply the base in the correct position and press evenly to remove trapped air.
6. Do not load it until the adhesive has fully stabilized; the exact curing time is not stated.
7. Install the item gradually and check the base before applying the full load.
8. Inspect the mounting regularly, particularly in humid areas or with frequently handled items.

It provides a direct way to install compatible items without drilling permanent holes. The two available designs support different mounting arrangements, while the waterproof and oil-resistant adhesive makes it practical for suitable smooth surfaces in kitchens and bathrooms.

Adhesive strength depends on surface cleanliness, smoothness and dryness, as well as load distribution and installation quality. The advertised capacity is up to approximately 3 kg under suitable conditions, but this is not a fixed guarantee for every surface or application.

Do not use it for valuable or breakable items, above beds or seating areas, or near equipment that could be damaged by a falling object. It should not be used as safety equipment or for loads whose failure could cause injury.

Inspect the adhesive base for lifting edges or moisture behind the pad. If adhesion weakens, remove the load immediately and replace the mounting base instead of continuing to rely on it.

• Smooth ceramic tile.
• Glass and suitable mirror surfaces.
• Smooth metal surfaces.
• Stable polished walls.
• Kitchens, bathrooms and offices.
• Compatible lightweight accessories and organizers.

• Adhesive Towel Holder — organizes towels in kitchens or bathrooms without drilling.
• Adhesive Shelf Support Holder — provides a no-drill mounting option for compatible shelves.
• 3D Self-Adhesive Wall Decor — refreshes smooth interior walls without traditional renovation work.