Luxury Hanging Incense Burner for Bakhoor and Oud





From the same category
A hanging incense burner is a metal stand with a perforated spherical chamber designed to diffuse the fragrance of bakhoor and oud while suspended from a decorative chain.
This burner combines practical fragrance use with an elegant decorative appearance. Openings in the chamber allow incense smoke to escape and spread through the room. It is suitable for homes, offices, majlis areas, guest receptions and special occasions, with an overall stand height of 24.5 cm.
Problem: A basic incense container may not complement the room’s décor, while hot charcoal and bakhoor require a dedicated holder and a stable position for organised use.
Solution: This burner provides a perforated metal chamber, an elegant freestanding hanger and a coordinated lower base. It also includes a special metal insert for holding the charcoal and providing thermal insulation inside the chamber.
- Decorative hanging metal design.
- Perforated spherical chamber allows fragrant smoke to escape.
- Suitable for bakhoor, oud and charcoal-based incense products.
- Freestanding holder with a coordinated lower base.
- Includes a special heat-insulating metal insert for the charcoal.
- Suitable for homes, offices, majlis areas and guest spaces.
- Can be displayed as a decorative accessory when not in use.
- Easy to open and clean after it has cooled completely.
- Home fragrance with bakhoor and oud.
- Scenting majlis and guest reception areas.
- Office and reception decoration.
- Hospitality occasions and family gatherings.
- Adding an Arabic-inspired decorative accent.
- Place the stand on a stable, level, heat-resistant surface away from edges.
- Position the supplied insulating metal insert inside the burner chamber.
- Light the charcoal in a well-ventilated area using a suitable tool and wait until it is ready.
- Use heat-resistant tongs to transfer the charcoal onto the designated metal insert.
- Place a small, suitable amount of bakhoor or oud over the charcoal.
- Close the chamber and secure it correctly to the chain and stand.
- Keep the burner in a well-ventilated location and do not move it while hot.
- Allow the charcoal and burner to cool completely before cleaning or storage.
| Part or Measurement | Practical Purpose |
|---|---|
| Overall Height: 24.5 cm | A compact display size for a table or hospitality surface while keeping the chamber suspended. |
| Base Width: 13.2 cm | Helps determine the surface space required for placement. |
| Chamber Width: Approx. 8.5 cm | Compact chamber for charcoal and a suitable amount of incense. |
| Chamber Height: Approx. 7 cm | The perforated spherical form allows smoke to escape while maintaining its decorative appearance. |
It combines the burner and stand in one freestanding design suitable for tables and other appropriate surfaces. The suspended spherical chamber and decorative openings create an attractive display, while the included metal insert provides a designated position for charcoal inside the burner.
With a basic incense container: It serves the primary purpose but may not provide a prominent decorative feature or a dedicated display stand.
With the hanging burner: You receive a perforated hanging chamber and a metal stand with its own base, combining fragrance and decorative presentation in one piece.
- Wait until the burner, charcoal and ash have cooled completely before touching or cleaning them.
- Dispose of cold ash in a suitable non-flammable container.
- Wipe the stand and chamber with a soft dry or slightly damp cloth.
- Dry all metal parts thoroughly after cleaning.
- Avoid abrasive cleaners that could affect the surface.
- Inspect the chain and hanging point before every use.
- Fragrancing homes and majlis areas.
- Guest reception and hospitality spaces.
- Well-ventilated offices and indoor areas.
- Special occasions and family gatherings.
- Fans of Arabic décor and metal incense burners.
- Enclosed areas without adequate ventilation.
- Locations accessible to children or pets.
- Unstable or heat-sensitive surfaces.
- People who are sensitive to smoke or strong fragrances.
| Property | Details |
|---|---|
| Product Type | Hanging incense burner with freestanding holder |
| Intended Use | Bakhoor, oud and charcoal-based incense products |
| Material | Metal |
| Design | Perforated spherical chamber suspended by a chain |
| Overall Height | 24.5 cm |
| Base Width | 13.2 cm |
| Burner Chamber Size | Approximately 8.5 cm wide × 7 cm high |
| Included Accessory | Special heat-insulating metal insert for holding charcoal |
| Recommended Locations | Home, office, majlis and hospitality areas |
- Use charcoal and incense only in a well-ventilated location.
- Never leave the burner unattended while lit or hot.
- Keep it away from curtains, upholstery, paper and other flammable materials.
- Keep the burner, charcoal and ash away from children and pets.
- Do not touch the chamber or internal insert during use or before they have cooled completely.
- Do not carry or move the burner while the charcoal is lit.
- Do not pour water into a hot burner; use an appropriate and safe charcoal-extinguishing method.
What is a hanging incense burner?
It consists of a perforated metal chamber suspended by a chain from a freestanding holder and is used to fragrance a space with bakhoor and oud.
What are its dimensions?
The stand measures 24.5 cm high, the base is 13.2 cm wide, and the burner chamber measures approximately 8.5 × 7 cm.
Does it include a holder for the charcoal?
Yes. It includes a special metal insert that holds the charcoal and provides thermal insulation inside the chamber.
Are charcoal and incense included?
Only the special metal charcoal insert is confirmed as included. The product page does not confirm that charcoal or incense is supplied.
Can it be used with bakhoor, oud and mamoul?
Yes, it is suitable for bakhoor, oud and mamoul intended for charcoal use. Follow the instructions for the selected incense and avoid overfilling the chamber.
Can it be displayed as décor?
Yes. Its hanging metal design makes it an attractive decorative accessory for a home, majlis or office even when it is not being used.
How should it be cleaned?
After it has cooled completely, remove the cold ash, wipe the metal parts gently and dry them thoroughly.