Large 3D Acrylic Wall Clock

A 3D acrylic wall clock is a decorative clock assembled from separate components, including the clock mechanism, hands and hour markers. The pieces can be distributed around the centre to create a layout suited to the available wall space, with an installed diameter of up to approximately 100 cm.

The clock uses a quartz movement and combines time display with modern wall decoration. The longer hand measures 33 cm and the shorter hand measures 27 cm. An installation guide and a wall-mounting screw for the clock mechanism are included. Colour choices are available according to the options shown on the product page.

• Raised, three-dimensional wall-clock design.
• Quartz movement for displaying the time.
• Decorative components made from acrylic.
• Adjustable installation diameter to suit the wall space.
• Maximum installed diameter of up to 100 cm.
• Suitable for larger walls at home or in the office.
• Combines practical time display with contemporary wall décor.
• Includes a guide for arranging the components.
• Includes a screw for mounting the clock mechanism.
• Available in colours shown in the product-selection menu.

• Decorating a living-room or majlis wall.
• Adding a large clock to a bedroom.
• Styling an office or reception area.
• Filling an empty wall above a sofa or console table.
• Creating a smaller or larger layout according to the available space.

1. Select a flat, clean and dry wall and determine the clock centre and desired diameter.
2. Check for concealed electrical cables or plumbing before drilling.
3. Use the supplied guide to mark evenly spaced hour positions around the centre.
4. Mount the clock mechanism centrally using a fixing suitable for the wall type.
5. Fit the hands in the order shown in the product instructions without bending them.
6. Ensure that the hands have sufficient clearance and do not touch each other or the wall.
7. Attach the acrylic hour markers at the prepared positions.
8. Remove any protective film from the acrylic faces after installation.
9. Insert the battery type and orientation indicated on the clock mechanism.
10. Set the time and observe a complete rotation to confirm that the hands do not collide.

Position the hour markers closer to the centre for a more compact clock or farther away for a larger design, up to a stated maximum diameter of 100 cm. Mark a light circle or use the installation guide before attaching the components to maintain even spacing.

Practical example: When installing the clock above a wide sofa, locate the sofa’s centre first and position the clock mechanism above it. Select a diameter that balances with the furniture rather than automatically using the maximum size.

It offers more layout flexibility than a fixed-frame clock because the distance between the centre and hour markers can be adjusted to suit the wall. Raised acrylic components add a contemporary appearance, while the quartz movement provides the practical time-display function.

Wipe the acrylic components with a soft, dry or slightly damp cloth. Avoid abrasive materials and harsh cleaners that may scratch the finish. Do not press or bend the clock hands during cleaning. Check the mounted pieces and clock mechanism periodically, and replace the battery with the type indicated on the movement when operation becomes slow or stops.

• Living rooms and majlis areas.
• Bedrooms and offices.
• Reception areas and indoor spaces.
• Large walls requiring practical decoration.
• Users who want to select a clock diameter suited to the room.
• Clean, flat indoor surfaces suitable for mounting.

• Small walls without sufficient clearance for the hands.
• Very rough, damp or peeling surfaces.
• Outdoor use or areas exposed to continuous moisture.
• Users who want a fully assembled, ready-to-hang clock.
• Anyone requiring a confirmed silent or non-ticking movement.

• The clock requires assembly and individual wall placement; installation service is not included.
• Check the battery type marked on the mechanism before purchase or operation.
• Do not bend the hands, and confirm that they do not collide after installation.
• Use a mounting fixing suitable for the wall type, even when a screw is supplied.
• Check for concealed electrical cables or plumbing before drilling.
• No specification confirms completely silent or non-ticking operation.
• Colour and reflective appearance may vary due to lighting and screen settings.
• Keep small components and installation tools away from children.

What is a 3D acrylic wall clock?

It is a clock made from a central movement, hands and separate acrylic hour markers arranged on the wall to create an adjustable, raised design.

What is the maximum installed diameter?

The component layout can reach approximately 100 cm in diameter according to the product description.

Must it be installed at the full one-metre diameter?

No. The hour markers can be positioned closer to the centre for a smaller layout, provided that the spacing remains even and readable.

What are the decorative pieces made from?

The decorative components are made from acrylic.

What type of movement does it use?

It uses a quartz movement.

What battery does it require?

The battery type is not stated on the product page. Check the marking on the mechanism or packaging.

Is the clock silent?

Silent or non-ticking operation is not specified, so its sound level cannot be guaranteed.

Are installation accessories included?

The description confirms an installation guide and a mounting screw, although an additional fixing suitable for the wall may be required.

Is installation service included?

No. The clock is sold without installation service.

How can I confirm that the hands are installed correctly?

Install them in the order shown in the guide, keep them straight with clearance between them and observe a complete rotation to confirm that they do not collide.

• Alternative large DIY 3D wall clock
• No-drill adhesive wall screw for compatible items
• Picture and frame wall hanger